Advantech ADAM-4016
Product is End of Life : 2020-10-26
Strain Gauge Input Module
- Input type: Pt or Ni RTD
- Strain Gauge Input
- Watchdog Timer
A strain gauge input module uses a microprocessor-controlled integrating A/D converter to convert sensor voltage or current signals into digital data for load cell and stress measurement. The digital data is then translated into either engineering units, twos complement hexadecimal format or percent-age of full-scale range (FSR)according to the module ’s configuration. When prompted by the host computer, the data is sent through a standard RS-485 interface. The strain gauge input module offers signal conditioning, A/D conversion, ranging, and RS-485 digital communication functions. They protect your equipment from ground loops and power surges by providing opto-isolation of the A/D input and transformer based isolation up to 3000 VDC .
Display
LED Indicators
Power
Power Supply
Power Requirement
10~30 VDC
Analog Input
Channels
4 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V (30 mA max.)
Current Input
±20 mA
Sampling Rates
10 samples/second
Resolution
16-bit
Input Impedance
Voltage: 2 MOhm Current: 125 Ohm
Span Drift
±25 ppm/°C
Zero Drift
±6 µV/°C
CMR @ 50/60 Hz
92 dB
Analog Output
Channels
4 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V (30 mA max.)
General
Watchdog Timer
System (1.6 second)
Connector
2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
5~95 %RH
Temperature (Storage)
-25~85 °C (-13~185 °F)
Interface
RS-485
Isolation Protection
3000 VDC
Communication Protocol
ASCII command
Communication Speed
Serial: From 1,200 to 115.2 k
Comm. Distance
Serial: 1.2 km
Data Flow Control
Yes
Digital Output
Channels
4 Open collector to 30V, 30 mA max. load
Power Dissipation
300 mW
LED Indicators
Power
Power Supply
Power Requirement
10~30 VDC
Analog Input
Channels
4 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V (30 mA max.)
Current Input
±20 mA
Sampling Rates
10 samples/second
Resolution
16-bit
Input Impedance
Voltage: 2 MOhm Current: 125 Ohm
Span Drift
±25 ppm/°C
Zero Drift
±6 µV/°C
CMR @ 50/60 Hz
92 dB
Analog Output
Channels
4 Open collector to 30V, 30 mA max. load
Voltage Range
0~10 V (30 mA max.)
General
Watchdog Timer
System (1.6 second)
Connector
2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
5~95 %RH
Temperature (Storage)
-25~85 °C (-13~185 °F)
Interface
RS-485
Isolation Protection
3000 VDC
Communication Protocol
ASCII command
Communication Speed
Serial: From 1,200 to 115.2 k
Comm. Distance
Serial: 1.2 km
Data Flow Control
Yes
Digital Output
Channels
4 Open collector to 30V, 30 mA max. load
Power Dissipation
300 mW
More Advantech products on request.
Customers who viewed this item also viewed