Advantech BB-UHR204
4-Port Industrial USB Hub
- High Retention USB Connectors
- Level 4 ESD Protection – 15kV
- Rugged Metal Case – Panel & DIN Rail Mount
- Wide Operating Temperature (-40 to 80°C)
- USB 2.0 – High Speed (480 Mbps )
The UHR304 and UHR204 are Industrial Grade Four Port USB Hubs. They are designed and tested to meet heavy industrial EMC standards and are UL listed for Class 1 Division 2 hazardous locations. High retention USB connectors hold standard USB cables tight and are perfect for high vibration applications - requiring up to 3.2 lbs-force to disconnect them. Model UHR304 has 4 kV Isolation between the upstream and downstream USB ports to protect expensive equipment from dangerous ground loops and to help ensure data integrity.
The Heavy Industrial EMC specifications allow these hubs to operate where standard office grade hubs fail – such as near variable frequency drives, motor control centers, welding, and other large electrical loads. They are powered from an external 10 to 30 VDC source. The non-isolated UHR204 may also be powered from the USB bus. Two power connectors are provided - terminal block or threaded / lockable barrel plug. Refer to ordering information for power supply recommendation. Each downstream port provides up to 500 mA of power to connected USB devices. Refer to the specification table for additional information concerning downstream power. Panel Mount Brackets and a DIN Rail Clip are included.
The BB-UHR204 is an industrial grade four port USB Hub. They are designed and tested to meet heavy industrial EMC standards and are UL listed for Class 1 Division 2 hazardous locations. High retention USB connectors hold standard USB cables tight and are perfect for high vibration applications - requiring up to 3.2 lbs-force to disconnect them.
The Heavy Industrial EMC specifications allow these hubs to operate where standard office grade hubs fail – such as near variable frequency drives, motor control centers, welding, and other large electrical loads. They are powered from an external 10 to 30 VDC source. The non-isolated UHR204 may also be powered from the USB bus. Two power connectors are provided - terminal block or threaded / lockable barrel plug. Refer to ordering information for power supply recommendation. Each downstream port provides up to 500 mA of power to connected USB devices. Refer to the specification table for additional information concerning downstream power. Panel Mount Brackets and a DIN Rail Clip are included.
The BB-UHR204 is an industrial grade four port USB Hub. They are designed and tested to meet heavy industrial EMC standards and are UL listed for Class 1 Division 2 hazardous locations. High retention USB connectors hold standard USB cables tight and are perfect for high vibration applications - requiring up to 3.2 lbs-force to disconnect them.
SPECIFICATIONS
General
- Supply Current
500 mA max. per channel
Ports
Upstream x 1 Type B Female, High Retention; Downstream x 4 Type A Female, High Retention
Bus
USB 1.1/2.0
USB INTERFACE
- Standards
USB 1.1 & 2.0
Upstream Port
(1) Type B Female – High Retention
Downstream Port
(4) Type A Female – High Retention
Speed
12 Mbps – Model UHR304
480 Mbps – Model UHR204
Multi-transaction Translator, 1 per port
Isolation
4 kV – Upstream to Downstream Model UHR304
Surge Protection
+/- 0.5 kV DC Ports, +/- 1 kV Signal Ports
ESD
15 kV Air, 8 kV Contact
High Retention
USB Ports require 15 N (3.2 lbs-force) withdrawal force using standard USB Cable
POWER
- Source
External (Required for Model UHR304)
Model UHR204 may be bus powered.
See Downstream power limitations
Power Connector
Terminal Block or threaded barrel jack
Input Voltage
10 to 30 VDC
Power
UHR204 – 16 Watts (External Source)
UHR304 – 16 Watts (External Source)
Power TB
3 Position, 5.08 mm spacing, 28-12 AWG, Solid Wire
Barrel Jack
Locking / Threaded, 5.5 mm,
Center Positive
Downstream Power
500 mA per port
100 mA per port when bus powered.
INDICATORS
- Power
Green LED (External Power)
Yellow LED (Bus Power)
Port Ready
Green LED
MECHANICAL
- Dimensions
13.9 x 8.7 x 3.5 cm (5.5 x 3.5 x 1.4 in)
Enclosure
IP 30, Metal
Weight
1.4 lbs (635 g)
MTBF UHR204
211,773 Hours
MTBF UHR304
190,999 Hours
MTBF Calc. Method
MIL 217F Parts Count Reliability
ENVIRONMENTAL
- Operating Temperature
-40 to 80°C
Storage Temperature
-40 to 85°C
Operating Humidity
0 to 95% Non-condensing
APPROVALS/CERTIFICATIONS
- Emissions
FCC Class B, CISPR Class B (EN55022)
CE
EN61000-6-2:2005 (Heavy Industrial)
EN61000-4-2:2008 (ESD) +/- 8kV contact, +/-15 kV air
EN61000-4-3:2006 (RI) 10 V/m, 80-1000 Mhz; 3 V/m 1.3 to 2.7 GHz
EN61000-4-4:2004 (EFT Burst) +/- 2kV DC ports; +/- 1 kV signal ports
EN61000-4-5:2005 (Surge) +/- 2 kV com; +/- 1 kV differential
EN61000-4-6:2008 (CI) 10 Vrms, 0.15 to 80 MHz
EN61000-4-8:2001 (Magnetic) 10 A/m, 50 Hz & 60 Hz
Other
IEC60068-2-27 (Shock) 50G Peak, 11 ms, 3 axes
IEC60068-2-6 (Vibration) 140-500 Hz, 4G, 3 axes
IEC60068-2-32 (Drop) 10 total drops from sides, corner, edges
UL
Class 1 Division 2 Listed File: E245458
ORDERING INFORMATION | |
Available Models | USB SPEED |
UHR304 | 4 Port Industrial USB Hub, Isolated |
UHR204 | 4 Port Industrial USB Hub |
ACCESSORIES | |
PS12VLB-INT-MED | Power Supply 12VDC, Medical Grade - US, EU, UK Blades |
MDR-20-24 | DIN Rail Mount Power Supply 24VDC, 1.0A |
USBAMBM-15F | Type A Male to Type B Male, 15 ft. (4.6 m) |
USBAMBM-3F | Type A Male to Type B Male, 3 ft. (0.9 M) (Grey) |
USBAMBM-6F | Type A Male to Type B Male, 6 ft. (1.8 m) (Grey) |
Customers who viewed this item also viewed