Advantech PCI-1245L

SPHINX in Europe
UK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > Motion Control Cards > Advantech PCI-1245L

Advantech PCI-1245L

4-axis Stepping and Servo Motor Control Universal PCI Card

Advantech PCI-1245L
4810_10749.png
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
  • Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  • Supports 2 axis linear interpolation
  • Supports T/S-curve
  • Supports speed override
  • Hardware emergency input
  • Watchdog timer
  • Supports programmable acceleration/deceleration rate
  • Programmable interrupt
  • RDY dedicated input channels & SVON/ERC dedicated output channels are switchable for general input and output purposes
The PCI-1245L is a 4-axis universal PCI card (supporting both 3.3 V and 5 V signal slots) stepping/pulse-type servo motor control card designed for entry-level applications which need to control interpolation, synchronization among multiple axes, with SoftMotion algorithm inside to perform the motion trajectory and precise movement. The PCI-1245L utilizes the high-performance FPGA to calculate the motion trajectories, synchronization timing control for multiple axes and input/output handling to offer functionality, such as 2 axis linear interpolation, T/S-curve, speed override, programmable acceleration/deceleration rate, 16 home modes and so on.

In addition, all Advantech motion controllers use the “Common Motion API” architecture which is a unified user programming interface and graphical utility. This architecture saves application maintenance and upgrades. Programmers can benefit from integrating any Advantech SoftMotion controller without changing large amounts of the application code. User-friendly examples decrease programming load, helping users complete configuration and diagnosis easily.

General

    Power Consumption
    Typical: 5 V @ 0.6 A, Max.: 5 V @ 1 A

    Temperature (Operating)
    0 ~ 60°C (32 ~ 140°F)

    Humidity
    5 ~ 95% RH, non-condensing (IEC 60068-2-3)

    Temperature (Storage)
    -20 ~ 85°C (-4 ~ 185°F)

    Connector
    1 x 100-pin SCSI Female Connector

    Dimensions (L x H)
    175 x 100 mm (6.9" x 3.9")

    Bus Type
    Universal PCI V2.2



Encoder Interface

    Isolation Protection
    2,500 VDC

    Input Type
    Quadrature (A/B phase) or up/down

    Input Range
    5 ~ 10 V

    Max. Input Frequency
    4 MHz under 4xAB mode

    Counts per Enc. Cycle
    x1, x2, x4 (A/B phase only)



Pulse Type Motion Control

    Motor Driver Support
    Pulse-type servo/stepping

    Number of Axis
    4

    Interpolation
    2-axis linear interpolation

    Max. Output Speed
    1 Mbps

    Step Count Range
    ±2, 147, 483, 646

    Pulse Output Type
    Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)

    Position Counters
    Range of command and actual position

    Velocity Profiles
    T-Curve, S-Curve

    Machine Interfaces
    LMT+, LMT-, ORG

    Servo Driver Interfaces
    ALM, INP

    General Digital I/O
    16-ch DI, 16-ch DO





ORDERING INFORMATION
Available Models
PCI-1245L-AE 4-axis Stepping/Pulse-type Servo Motor Control Universal PCI Card
PCI-1245LIO-AE 4-axis Stepping and Servo Motor Control Universal PCI Card with I/O-extension
Accessories
MTB-3956LIO-AE 100-pin DIN-rail SCSI 4-axis Motion Wiring Board w/ I/O-extension (Only for PCI-1245LIO)
ADAM-3956-AE 100-pin DIN-rail SCSI 4-axis Motion Wiring Board
ADAM-3955-AE 50-pin DIN-rail SCSI 2-axis Motion Wiring Board
ADAM-3952-AE 50-pin DIN-rail SCSI and Box Header Board
ADAM-39100-AE 100-pin DIN-rail SCSI Wiring Board
PCL-101100M-1E/2E/3E 100-pin SCSI Cable, 1m/2m/3m
PCL-10251-1E/2E/3E 100-pin SCSI to Two 50-pin SCSI Cable, 1m/2m/3m
PCL-10153PA5-2E 50-pin Cable to Panasonic A4/A5 Servo, 2 m
PCL-10153PA5LS-2E 50-pin Cable to Panasonic MINAS A Servo, 2 m
PCL-10153YS5-2E 50-pin Cable to Yaskawa Sigma V/7 Servo, 2 m
PCL-10153MJ3-2E 50-pin Cable to Mitsubishi J3/J4 Servo, 2 m
PCL-10153DA2-2E 50-pin Cable to Delta A2 Servo, 2 m



Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.