Advantech EKI-5726FI
16-port+2 SFP Gigabit Ethernet ProView Switch
- Communicates with SCADA software via Modbus/TCP
- Communicates with NMS (Networking management system) via SNMP
- Port-based QoS for deterministic data transmission
- -40~75°C operating temperature range
- 8.4~52.8 V DC wide-range power input
- EMS level 3 protection for extreme outdoor environments
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Jumbo Frame Support (Up to 9,216 Bytes)
- Supports redundant 12~48V DC power input and P-Fail relay
- Loop detection
The EKI-5726FI are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5726FI switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.
Communications
- Standard
IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
LAN
10/100/1000Base-T(X), Optional 100Base-FX,1000Base-SX/LX/LHX/XD/ZX/EZX
Transmission Distance
Ethernet: UP to 100 m (4-wire Cat.5e, Cat.6 RJ-45 cable suggested for Gigabit port)
SFP: UP to 110 km (depends on SFP)
Transmission Speed
Ethernet: 10/100/1000 Mbps Auto-Negotiation
Gigabit Copper: 10/100/1000 Mbps, Auto-Negotiation
Gigabit Fiber: UP to 1000 Mbps
Interface
- Connectors
16 x RJ45
2 x SFP ports
6-pin removable screw terminal (power & relay)
LED Indicators
P1, P2, P-Fail, Loop detection 10/100/1000T(X): Link/Activity, Speed
SFP: Link/Activity
Switch Properties
- MAC Table Size
8K
Packet Buffer Size
4.1M bit
Switching Capacity
36 Gbps
Jumbo Frame
9216 bytes
Power
- Power Consumption
Max. 9.6W
Power Input
12~48 V DC (8.4~52.8 V DC), redundant dual inputs
Fault Output
1 Relay Output
Mechanism
- Dimensions (W x H x D)
74 x 120 x 84 mm
Enclosure
IP30, metal shell with solid mounting kits
Mounting
DIN-Rail, Wall
Protection
- Reverse Polarity
Present
Overload Current
Present
Environment
- Operating Temperature
-40~75°C (-40~167°F)
Storage Temperature
-40 ~ 85°C (-40 ~ 185°F)
Operating Humidity
10 ~ 95% (non-condensing)
Storage Humidity
10 ~ 95% (non-condensing)
MTBF
1,962,789 hours
Certification
- Safety
IEC/EN 60950-1, UL508, Class 1 Division 2, ATEX, IECEx
EMC
CE, FCC
EMI
EN 55011/55022 Class A, EN 61000-6-4, FCC Part 15
Subpart B Class A
EMS
EN 61000-4-2 (Level 3)
EN 61000-4-3 (Level 3)
EN 61000-4-4 (Level 3)
EN 61000-4-5 (Level 3)
EN 61000-4-6 (Level 3)
EN 61000-4-8 (Level 3)
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Ordering | |
EKI-5726FI | 16-port+2 SFP Gigabit Ethernet ProView Switch with Wide Operating Temperature Range |
Customers who viewed this item also viewed