MOXA DA-720-DPP
x86 2U 19-inch high density 14 gigabit Ethernet rackmount computers with 6th Gen Intel® Core™ i7 CPU
- IEC 61850-3, IEEE 1613, and IEC 60255 compliant for power substation automation systems
- EN 50121-4 compliant for railway wayside applications
- 6th Gen Intel® Core™ i7/i5 CPU (Skylake)
- 2 built-in DDR4 memory sockets
- 1 mSATA for OS and 1 SATA III for storage expansion
- 14 gigabit Ethernet ports for network redundancy
- 2 PCIe expansion slots for expansion modules
- 2 USB 3.0 ports for SuperSpeed peripherals
- 2 isolated RS-232/422/485 ports
- Embedded Debian 8 Linux (W10 by CTOS)
- Supports 110 to 240 VDC and 100 to 240 VAC power inputs
The DA-720-DPP series computers are x86 platforms with 14 gigabit Ethernet ports, 2 isolated RS-232/422/485 serial ports, USB, VGA, and 2 PCIe ports for expansion modules. The DA-720-DPP comes in a standard 19-inch 2U rack-mountable case with a robust design ideal for specialized industrial automation applications, including power substations, transportation and shipping, and oil and gas production and supply.
With IEC-61850-3 and IEEE 1613 compliance, the DA-720-DPP is sure to deliver stable and reliable system operation for power applications. The DA-720-DPP also complies with the IEC 60255 standards which cover the protection of electrical relays in a smart substation. IEC 60255 is one of the most widely used standards for testing relays and protection equipment, and compliance with the standard ensures that the DA-720-DPP will work reliably and seamlessly with IEDs as part of a robust substation automation system.
EN 50121-4 compliance confirms that the DA-720-DPP can deliver stable and reliable system operations in rail applications. In station ISCS (Integrated Supervisory Control System) and wayside control and monitoring systems, a powerful front-end processor is needed for controlling the local SCADA and traction power relay house. The expandable serial interfaces and 14 gigabit Ethernet ports enable the integration of station subsystems, including AFC, PAS, PSD, and FAS, on a single platform. For wayside applications, you can also integrate disaster prevention, traction power, and signaling and safety systems to provide an integrated view of your smart rail setup.
The DA-720-DPP comes with one of two different CPU options, and basic models that allow system designers to install the mSATA, RAM, and operating system according to their specific requirements. Such a wide choice of options is particularly welcome when it comes to designing customized industrial solutions.
The DA-720-DPP comes with 2 PCIe ports for expansion modules, including an 8-port RS-232/422/485 module, as well as 4-port and 8-port 10/100/1000 Mbps LAN modules. The DA-720-DPP computers can support up to 22 gigabit LAN ports plus 10 serial ports, or 14 gigabit LAN ports and 18 serial ports, making the DA-720-DPP an ideal solution for a wide range of industrial automation applications.
Smart Recovery Function
The DA-720-DPP’s Smart Recovery function minimizes downtime by making it easy to recover from operating system crashes. Engineers who are experts in a particular vertical market may not have enough computer domain knowledge to know how to fix operating system problems. Moxa Smart Recovery™ is an automated BIOS-level software recovery system that allows engineers to automatically trigger OS recovery to minimize downtime.
Proactive Monitoring Function
Moxa Proactive Monitoring is a small-footprint, resource-friendly, easy-to-use utility that allows users to track a number of system parameters. Users can view the current parameter values for these key parts by simply clicking on the icons corresponding to the parameters in the user interface. User-defined key part indicators (KPIs) are used to monitor the computer’s key parts. Visible and/or audio alerts are triggered automatically via relay and SNMP traps when these KPIs exceed their preset threshold values, making it extremely convenient for operators to avoid system downtime by setting up predictive maintenance tasks well in advance.
With IEC-61850-3 and IEEE 1613 compliance, the DA-720-DPP is sure to deliver stable and reliable system operation for power applications. The DA-720-DPP also complies with the IEC 60255 standards which cover the protection of electrical relays in a smart substation. IEC 60255 is one of the most widely used standards for testing relays and protection equipment, and compliance with the standard ensures that the DA-720-DPP will work reliably and seamlessly with IEDs as part of a robust substation automation system.
EN 50121-4 compliance confirms that the DA-720-DPP can deliver stable and reliable system operations in rail applications. In station ISCS (Integrated Supervisory Control System) and wayside control and monitoring systems, a powerful front-end processor is needed for controlling the local SCADA and traction power relay house. The expandable serial interfaces and 14 gigabit Ethernet ports enable the integration of station subsystems, including AFC, PAS, PSD, and FAS, on a single platform. For wayside applications, you can also integrate disaster prevention, traction power, and signaling and safety systems to provide an integrated view of your smart rail setup.
The DA-720-DPP comes with one of two different CPU options, and basic models that allow system designers to install the mSATA, RAM, and operating system according to their specific requirements. Such a wide choice of options is particularly welcome when it comes to designing customized industrial solutions.
The DA-720-DPP comes with 2 PCIe ports for expansion modules, including an 8-port RS-232/422/485 module, as well as 4-port and 8-port 10/100/1000 Mbps LAN modules. The DA-720-DPP computers can support up to 22 gigabit LAN ports plus 10 serial ports, or 14 gigabit LAN ports and 18 serial ports, making the DA-720-DPP an ideal solution for a wide range of industrial automation applications.
Smart Recovery Function
The DA-720-DPP’s Smart Recovery function minimizes downtime by making it easy to recover from operating system crashes. Engineers who are experts in a particular vertical market may not have enough computer domain knowledge to know how to fix operating system problems. Moxa Smart Recovery™ is an automated BIOS-level software recovery system that allows engineers to automatically trigger OS recovery to minimize downtime.
Proactive Monitoring Function
Moxa Proactive Monitoring is a small-footprint, resource-friendly, easy-to-use utility that allows users to track a number of system parameters. Users can view the current parameter values for these key parts by simply clicking on the icons corresponding to the parameters in the user interface. User-defined key part indicators (KPIs) are used to monitor the computer’s key parts. Visible and/or audio alerts are triggered automatically via relay and SNMP traps when these KPIs exceed their preset threshold values, making it extremely convenient for operators to avoid system downtime by setting up predictive maintenance tasks well in advance.
Hardware Specifications
- Computer
- Core i5-6300U, 2.4 GHz, dual-core CPU
- Core i7-6600U, 2.6 GHz, dual-core CPU
- Front: 2 USB 2.0 ports
- Rear: 2 USB 3.0 ports
- VGA: CRT display mode with pixel resolution up to 1920 x 1200 @ 60 Hz
- DVI-D: Display mode with pixel resolution up to 1920 x 1200 @ 60 Hz
- Built-in buzzer and RTC (real-time clock) with lithium battery backup
- Built-in relay for audio/visual alarm
- CPU
lntel 6th Gen Skylake Processor (BGA CPU package)
OS
Linux Debian 8 (pre-installed)
Note
Windows 10 Enterprise LTSB 64-bit available by CTOS
System Chipset
Intel© HD Graphics 520
BIOS
128 Mbit Flash BIOS, Plug & Play, ACPI
System Memory
32 GB capacity, 4 GB for Linux Debian 8 pre-installed; 2 slots for DDR4 SO-DIMM
USB
4 USB ports, system bootable, type A connector
Storage
- Built-in
8 GB industrial mSATA to store 64-bit Debian 8 Linux OS
Storage Expansion
1 x SATA 3.0
Display
- Graphics Controller
Intel® HD Graphics (Integrated)
Display Interface
1 VGA output (DB15 female connector) and 1 DVI-D
Resolution
Ethernet Interface
- LAN
Auto-sensing 10/100/1000 Mbps ports x 14
Magnetic Isolation Protection
1.5 kV built-in
Serial Interface
- Serial Standards
2 RS-232/422/485 ports (terminal block)
ESD Protection
8 kV contact, 15 kV air
Surge Protection
2 kV line-to-line and 4 kV line-to-ground surge protection, 8/20 µs waveform
Insulation
500 V
Isolation
2 kV
Pull low/high
150k
Flow Control
Not supported
Baudrate
50 bps to 115.2 kbps
Serial Signals
- RS-232
TxD, RxD, RTS. CTS, GND
RS-422
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w
Data+, Data-, GND
LEDs
- System
Power, Storage
LAN
Link or Active
Serial
2
Programmable
4 LEDs
Communication
Module A x 16, Module B x 16
Switches and Buttons
- Power Button
On/Off (on rear panel)
Reset Button
Hard Reset (on front panel)
Physical Characteristics
- Housing
SECC sheet metal (1 mm)
Weight
6.5 kg (14.33 lb)
Dimensions
440 x 301 x 90 mm (17.32 x 12.20 x 3.54 in) (without rackmount ears)
Mounting
Standard 19-inch rack
Environmental Limits
- Operating Temperature
-25 to 55°C (-13 to 131°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Anti-Vibration
3 mm (2-9 Hz), 10 m/s˛ (9-200 Hz), 15 m/s˛ (200-500 Hz) @ IEC-61850-3, IEC 60870-2-2/Bm/(3M6)/(4M6), sine wave, 2-500 Hz, 1 Oct/min, 10 cycles, 2 hrs 40 mins per axis
Anti-Shock
100 m/s˛ @ IEC-61850-3, IEC 60870-2-2/Bm/(3M6)/ (4M6), half sine wave, 11 ms
Power Requirements
- Input Voltage
100 to 240 VAC; 110 to 240 VDC
Input Current
TBD
Standards and Certifications
- Safety
UL 60950-1, IEC 60950-1, EN 60950-1
Electrical Substation
IEC 61850-3, IEEE 1613, IEC 60255
Railway
EN 50121-4
Protection Relay
IEC 60255
EMC
EN 61000-6-2/6-4
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
IEC 61000-4-11
Green Product
RoHS, CRoHS, WEEE
Reliability
- Alert Tools
Automatic Reboot Trigger
Built-in watchdog timer, configurable for restarts at 1 to 255 second intervals
MTBF (mean time between failures)
- Time
TBD
Software Specifications
- Linux
- Moxa API Library (Watchdog timer, Moxa serial I/O control)
- GNU C/C++ cross-compiler
- GNU C library
- Perl
- 64-bit support
- Remote Client
- Remote Procedure Call
- .Net Framework 4.6
- Remote Desktop Protocol 10
- COM OLE Application Support
- COM+ Application Support
- MSMQ
- Works Folder Client
- Internet Explorer 11
- IIS 10
- Windows Data Access Components
- Windows Backup and Restore
- Common Diagnostic Tools
- Problem Reports and Solutions
- MPEG DTV-DVD Audio Decoder (MPEG-2, AAC)
- MPEG Layer-3 Audio Codecs (MP3)
- MPEG4 Decoders
- Windows Media Video VC-1 (WMV) Codecs
- DirectX and Windows Device Experience
- Create and play DVDs
- Photo Viewer
- Remote media stre
- Group Policy Management
- Windows Management Instrument (WMI)
- Windows Update
- Extensible Authentication Protocol (EAP)
- Internet Authentication Service
- Telnet Server
- Bluetooth
- Domain Services
- Network Access Protection
- Network and Sharing Center
- Quality of Service
- Remote Access Service (RAS)
- Telephony A
- Credential Roaming Service
- Credentials and Certificate Management
- Windows Authorization Manager (AZMAN)
- Windows Security Center
- Active Directory Rights Management
- Security Base
- Encrypted File System (EFS)
- MS AntiMalware
- Windows
- Unified Write Filter (UWF)
- Message Box Default Reply
- Registry Filter
- WSDAPI for .NET
- OS
Linux Debian 8 64-bit
Web Server (Apache)
Allows you to create and manage web sites; supports PHP and XML
File System
EXT4
Internet Protocol Suite
TCP, UDP, IPv4, SNMPv1/v2c/v3, ICMP, ARP, HTTP, CHAP, PAP, SSH 1.0/2.0, SSL, DHCP, NTP, NFS, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security
OpenVPN, iptables firewall
Secure Shell for Remote Access
SSH allows remote logins to a secure encrypted console from any connected network
Dial-up Networking
PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the Point-to-Point Protocol (PPP). Works with ‘chat’, ‘dip’, and ‘diald’, among (many) others. Supports IP, TCP, UDP, and (for Linux)
File Server
Enables remote clients to access files and other resources over the network
Watchdog
A watchdog timer that triggers a system reset upon software freezes, for both specific applications and system-wide failures.
Application Development Software
Windows 10 Enterprise LTSB (by CTOS)
- Core OS
Applications and Services Development
Internet Services
File Systems and Data Storage
Diagnostics
Graphics and Multimedia
Management
Networking
Security
Embedded Features
Embedded Self-Health Diagnostics
SNMP-based remote scripting layer for monitoring, reporting, and control
ORDERING INFORMATION | |
Available Models | |
DA-720-C5-DPP | Rackmount computer with Core i5-6300U, 2.4 GHz, dual-core CPU, without mSATA/RAM/OS, 14 gigabit Ethernet ports, 2 isolated RS-232/422/485 ports, 2 PCIe expansion slots, VGA x 1, DVI-D x 1, USB x 4, IEC 61850-3 compliant, -25 to 55°C operating temperature |
DA-720-C5-LX-DPP | Rackmount computer with Core i5-6300U, 2.4 GHz, dual-core CPU, with 8G mSATA, 4G RAM and Linux Debian 8 64-bit, 14 gigabit Ethernet ports, 2 isolated RS-232/422/485 ports, 2 PCIe expansion slots, VGA x 1, DVI-D x 1, USB x 4, IEC 61850-3 compliant, -25 to 55°C operating temperature |
DA-720-C7-DPP | Rackmount computer with Core i7-6600U, 2.6 GHz, dual-core CPU, without mSATA/RAM/OS, 14 gigabit Ethernet ports, 2 isolated RS-232/422/485 ports, 2 PCIe expansion slots, VGA x 1, DVI-D x 1, USB x 4, IEC 61850-3 compliant, -25 to 55°C operating temperature |
DA-720-C7-LX-DPP | Rackmount computer with Core i7-6600U, 2.6 GHz, dual-core CPU, with 8G mSATA, 4G RAM and Linux Debian 8 64-bit, 14 gigabit Ethernet ports, 2 isolated RS-232/422/485 ports, 2 PCIe expansion slots, VGA x 1, DVI-D x 1, USB x 4, IEC 61850-3 compliant, -25 to 55°C operating temperature |
Compatible Modules
| |
DE-LN04-RJ | 4-port 10/100/1000 Mbps PCIe LAN module |
DE-LN08-RJ | 8-port 10/100/1000 Mbps PCIe LAN module |
DE-SP08-I-TB | 8-port RS-232/422/485 PCIe serial module |
Optional Accessories
| |
USB Dongle Kit | USB dongle kit installation package. This kit can be installed inside the DA-681A and is suited for security applications. For example, the license activate USB dongle for SCADA or the backup image st |
DA-720 HDD Kit | DA-720 HDD/SSD installation package, supports single HDD/SSD |
Customers who viewed this item also viewed