TERZ NITE-T1XRS
Unmanaged Industrial Ethernet Switches
Fast Ethernet & Single Pair Ethernet
![TERZ NITE-T1XRS](https://www.sphinxcomputer.de/produktdb/images/products/8137_35788.png)
![8137_35788.png](https://www.sphinxcomputer.de/produktdb/images/products/8137_35788.png)
- Flexible use with 24 VAC/VDC
- 5x 100Base-T1 Ports IEC 63171-2
- Minimal installation width 25 mm
- 1x RJ45 100Base-T(X) Port
- Temperature range -40 to +70°C
- Master|Slave configurable
- Polarity protection
- PROFINET suitable
The configurable RS51 features 5x SPE (Single Pair Ethernet) T1 ports in accordance with IEC 63171-2 and one Fast Ethernet RJ45 TX port. Using the rotary coding switch, all five SPE ports can be individually set as Master or Slave. The options for Master|Slave auto detection enable devices to connect independently of their settings, with the T1-RS51 adjusting its role as Master or Slave accordingly. Two different options are available: With "Auto 1," the role is re-learned after a link or power-down, similar to the auto-negotiation function in standard Ethernet switches. "Auto 2" retains the learned setting per port, even after a link-down. This enables an extremely fast link establishment and is particularly suitable for applications where the connected end devices remain static regarding their settings after an initial learning process.
Specifications
- General
- Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes (only RJ45)
Frame size:
1,522 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes - 4 priority queues
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
Port count (RJ45)
6
MTBF (SN 29500, Mio. h)
-
Frame Forwarding (Art.-No.) | xxxxx0 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding |
Power supply / electronics
- Nominal voltage:
Vin 24 VAC 50/60 Hz / 24 VDC
Permitted voltage range:
8 to 28 VAC / 9 to 36 VDC
Connection type:
3-pole pluggable, screw connector (+ - FE)
Wire cross-section:
0.75 to 2.5 mm² (AWG 20 to 13)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC
Polarity protection:
Yes
Protection category:
III
Isolation:
2.25 kVDC; Vin ⟺ Ethernet Ports | Vin ⟺ housing
Port count (RJ45) | 6 | |
Power usage (W) Min | Max | @24VDC @24VAC |
1,6 | 1,9 2,0 | 2,4 |
Input current (mA) Min | Max | @24VDC @24VAC |
67 | 80 135 | 160 |
Mechanical properties
- Housing material:
Anodised aluminium, stainless steel
Mounting:
35 mm DIN rail
IP Protection class (operation):
IP30
Port count (RJ45) | 6 |
Width (mm) | 25 |
Height (mm) | 103 |
Depth (mm) | 77,4 |
Weight (g) | 210 |
Ethernet Interface 1
- IEEE Standards:
IEEE 802.3bw 100Base-T1
Connection type:
Connector acc. IEC 63171-2
Port Count | Speed:
5 | 100 Mbit/s
T1 Port Mode:
configuration via rotary coding switch
Cable length:
min. 15 m (Twisted Pair) up to 100 m possible
Ethernet Interface 2
- IEEE Standards:
802.3 10BaseT, 802.3u 100BaseT(X)
Isolation:
2.25 kVDC; Ethernet Port ⟺ housing | Port ⟺ Port
Connection type:
RJ45
Port Count | Speed:
1 | 10/100 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
EMC and environmental specifications
- Operating temperature:
-40°C to +70°C
Storage temperature:
-40°C to +85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 50121-3-2, 61000-6-2, 55024
EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Approvals and certifications
- CE
Status and diagnostic indicators
- LED:
Power | Link/Activity & T1 MASTER/SLAVE per Port
Ordering Information
Article | Art.-No. | Specification |
---|---|---|
NITE-T1XRS51-0140 | 201140 | 5x SPE, 1x RJ45, M|S configurable |
![](images/Layout/Weitere-Informationen_weiss.png)